Overview
The all new CAN Bridge LR (Long Range) is now available! The Wireless CAN Bridge LR is ideal for any
distributed application where wiring is easily damaged, or where freedom of
motion is critical.
The Wireless CAN Bridge functions as a wireless modem that transfers CAN
messages. Using the Wireless CAN Bridge, a single DeviceNet scanner can
control nodes on either side of a wireless link with up to 1400 feet of
separation. A full 64 node DeviceNet can be implemented depending on scan
rates and frame density. Since actual CAN messages are transferred, the
Wireless CAN Bridge supports any type of CAN bus standard including CAN Open, CAN Kingdom and J1939.
Matric wireless control systems are designed to operate reliably in harsh
industrial environments. Careful choice of materials and a quality design
process has made Matric products the top choice for industrial process
control for more than 20 years.
General
- Size: 3 1/8 X 3 X 6 5/16 inches
- Weight: 2 lb
- DIN rail or four screw mount
- 1200 frames per second transfer rate
- Five pin male micro connector
- 16 bit CPU
- CPU watchdog
- Powered by 24VDC +/- 5%
Radio
- 2.4 GHz Spread Spectrum
- Up to 1400 feet range (unobstructed line of sight)
- Remote antenna mount to 30
feet
- License free radio (FCC Part
15B)
Configuration
- Easy integration (no
programming required)
- Configuration via internal
dip switches
- Radio link master or slave
- Hi/low power
- Standard versus extended CAN
frame formats
- Baud rate (125K, 250K, 500K)
- Mode (Data security and
throughput options)
Indicators
- Signal strength
- Bus loading
- Data Loss Cause
- Power
Physical
- Enclosure sealed to IP65
(washdown)
- Operational temperature 0°C
to +70°C
- Storage temperature -40°C to
+85°C
Application Info
|
