Industrial networks are changing the face of factory automation. Smart
sen sors and actuators now communicate with industrial PCs or PLCs using a
common trunk line rather than separate wires. Matric has developed sensors
and wireless modems to maximize the usefulness of the DeviceNet fieldbus.
Clinometer
This motion sensor is designed to withstand the extremes of industrial
applications while providing highly accurate angle readings in two axes.
NetComm
Add the convenience of a wireless handset to your DeviceNet application
using Matric's NetComm system. Workcenter selection is possible allowing a
user to control different equipment attached to the same network. For more
information look under Wireless Solutions.
CAN Bridge
This system extends DeviceNet's flexibility by implementing a wireless CAN
trunk line that is transparent to nodes on either side of the wireless link.
All DeviceNet data rates are supported and a standard DeviceNet network can
be implemented over a typical range of 500 feet indoors. For more
information look under Wireless Solutions.
|
