CAN Bridge

CAN Bridge

CAN Bridge

$995.00

Short Range Wireless CAN Bridge – up to 200 ft. (unobstructed line of sight)

CAN Bridge Brochure

Please Note:

Unless you are purchasing a single (1) CAN Bridge for a replacement, you will need to purchase the product in pairs (2) to make a complete wireless bridge for your network solution.

SKU: 500-1277

Product Description

DeviceNet has gone wireless! Escape the limitations of hard wired systems using Matric’s Wireless CAN Bridge. The Wireless CAN Bridge is ideal for any distributed application where wiring is easily damaged, or where freedom of motion is critical.

The Wireless CAN Bridge functions as a wireless modem that transfers CAN messages. Using the Wireless CAN Bridge, a single DeviceNet scanner can control nodes on either side of a wireless link with up to 200 feet of separation. A full 64 node DeviceNet can be implemented depending on scan rates and frame density. Since actual CAN messages are transferred, the Wireless CAN Bridge supports any type of CAN bus standard including CAN Open, CAN Kingdom and J1939.

Matric wireless control systems are designed to operate reliably in harsh industrial environments. Careful choice of materials and a quality design process has made Matric products the top choice for industrial process control for more than 20 years.

The drawing is a typical configuration for using a single pair of Wireless CAN Bridges. But, it’s not limited to just one pair. See the drawings below for additional network configurations using multiple pairs.  Click on the image to enlarge.

General

  • Size: 3 1/8 X 3 X 6 5/16 inches
  • Weight: 2 lb
  • DIN rail or four screw mount
  • 1200 frames per second transfer rate
  • Five pin male micro connector
  • 16 bit CPU
  • CPU watchdog
  • Powered by 7-30VDC, 200 mA at 24VDC +/- 5%

Radio

  • 2.4 GHz Spread Spectrum
  • Up to 200 feet range (unobstructed line of sight)
  • Remote antenna mount to 30 feet
  • License free radio (FCC Part 15B)

Configuration

  • Easy integration (no programming required)
  • Configuration via internal dip switches
  • Radio link master or slave
  • Hi/low power
  • Standard versus extended CAN frame formats
  • Baud rate (125K, 250K, 500K)
  • Mode (Data security and throughput options)

Indicators

  • Signal strength
  • Bus loading
  • Data Loss Cause
  • Power

Physical

  • Enclosure sealed to IP65 (washdown)
  • Operational temperature 0°C to +70°C
  • Storage temperature -40°C to +85°C
  • Weight 2 lbs

Brochure CANBridge

CAN Bridge LR

CAN Bridge LR

$1,195.00

Long Range Wireless CAN Bridge – up to 1400 ft. (unobstructed line of sight)

CAN Bridge Long Range Brochure

Please Note:

Unless you are purchasing a single (1) CAN Bridge for a replacement, you will need to purchase the product in pairs (2) to make a complete wireless bridge for your network solution.

SKU: 500-1349

Product Description

Overview
The all new CAN Bridge LR (Long Range) is now available! The Wireless CAN Bridge LR is ideal for any distributed application where wiring is easily damaged, or where freedom of motion is critical.

The Wireless CAN Bridge functions as a wireless modem that transfers CAN messages. Using the Wireless CAN Bridge, a single DeviceNet scanner can control nodes on either side of a wireless link with up to 1400 feet of separation. A full 64 node DeviceNet can be implemented depending on scan rates and frame density. Since actual CAN messages are transferred, the Wireless CAN Bridge supports any type of CAN bus standard including CAN Open, CAN Kingdom and J1939.

Matric wireless control systems are designed to operate reliably in harsh industrial environments. Careful choice of materials and a quality design process has made Matric products the top choice for industrial process control for more than 20 years.

The drawing is a typical configuration for using a single pair of Wireless CAN Bridges. But, it’s not limited to just one pair. See the drawings below for additional network configurations using multiple pairs.  Click on the drawing(s) to enlarge.

General

  • Size: 3 1/8 X 3 X 6 5/16 inches
  • Weight: 2 lb
  • DIN rail or four screw mount
  • 1200 frames per second transfer rate
  • Five pin male micro connector
  • 16 bit CPU
  • CPU watchdog
  • Powered by 7-30VDC, 200 mA at 24VDC +/- 5%

Radio

  • 2.4 GHz Spread Spectrum
  • Up to 1400 feet range (unobstructed line of sight)
  • Remote antenna mount to 30 feet
  • License free radio (FCC Part 15B)

Configuration

  • Easy integration (no programming required)
  • Configuration via internal dip switches
  • Radio link master or slave
  • Hi/low power
  • Standard versus extended CAN frame formats
  • Baud rate (125K, 250K, 500K)
  • Mode (Data security and throughput options)

Indicators

  • Signal strength
  • Bus loading
  • Data Loss Cause
  • Power

Physical

  • Enclosure sealed to IP65 (washdown)
  • Operational temperature 0°C to +70°C
  • Storage temperature -40°C to +85°C

CAN Bridge Long Range Brochure